satoh Buck S-470D User Manual

SECTI N 1.
STARTING AND STOPPING THE ENGINE
Before starting the engine, be sure to check the following points.
1. Confirm that the fuel tank is filled with sufficient fuel.
2.
Check the amount of oil in the engine, and transmission and check
cooling water level.
3.
Always perform the daily maintenance described in SECTION 2.
STARTING
On the S-470 and S-4700, the safety starter switch is provided for pre-
venting unforeseen accidents from breaking out in starting the engine.
Installed between the starter switch and starter motor, the safety starter
switch works as a kind of circuit breaker by which, in case that the
clutch is not disengaged completely, the electric circuit in the engine
starter motor can hardly be closed even when the starter key is turned to
START.
1. Set the throttle lever at the center between idling and high speed.
2. After applying the parking brake, place the main shift lever and
PTa shift lever in neutral. Then, fully depress the clutch pedal.
3. Insert the starter key into the key switch and turn it counterclock-
wise and hold it at "Heat" position to heat the glow plugs. As soon
as the glow signal lamp on instrument panel glows red, about 30
seconds later rapidly turn the key to the "Start" position and the
starter motor will rotate and the engine will start.
-6-

satoh Buck S-470D Specifications

General

Brand	satoh
Model	Buck S-470D
Category	Tractor
Language	English