REPLACEMENT OF 4-WHEEL
DRIVE
FRONT
AXLE
OIL
DIFFERENTIAL
CASE
OIL
AND KINGPIN GEAR CASE
OIL
Remove the dl'ain plugs
at
the
bottom
of the left and right kingpin gear
cases and
the
diffel'ential geal' case. After dl'ained oil completely, tighten
the plug securely.
In
the
case
of
the
front
axle differential gear case and
the
kingpin gear
case make lubrication up
to
the half of
the
specified level
hom
the
lubri-
cating ports on
the
right and left side of
the
front
axle.
Remove
the
kingpin gear case oil level plug
in
enough time after replen-
ished oil. Check and see the oil level
as
specified and then tighten the
plug enough and securely.
-
42-
To Next Page
Loading...
Need help?
General
