Schenker SMART 60 User Manual

3 – PRODUCT PRESENTATION COD: 60S12/24.B.2021
EN
THE PRESENT MANUAL BELONGS TO - Schenker Italia - ALL RIGHTS RESERVED
12
PUMP
Dimensions
Length: 44 cm
Width: 23 cm
Height: 29 cm
Weight: 10 Kg
Hydraulic Connection
Water inlet: ¾’’ fitting, 16mm internal diameter reinforced hose.
Water outlet: ¾’’ fitting, 16mm internal diameter reinforced hose.
Feed pump type: Shurflo diaphragm pump
Filters: n. 1 Cartridge filter 5 microns 2.32" x 9 ¾’’
n. 1 Active carbon filter 2.32" x 9 ¾’’
Power supply: 12 VDC +/- 15% (60S12 version)
24 VDC +/- 15% (60S24 version)
Average electric consumption: 250 Watt/h average
Nominal fresh water production: 60 Lit/h +/- 20% @ seawater 25 °C salinity 35.000 ppm
CEE conformity: In compliance with directives 89/392 CEE sect.1 (general safety machines
requirements), 89/336 CEE (electromagnetic compatibility), 73/23 CEE
(electric safety requirements)
3.6 Features of the product
The fresh water produced by a Schenker watermaker, obtained by clean seawater, has a high purity. Despite
this, the potability may not be guaranteed: bacterium caused by non-observance of shutdown and cleaning
procedures may be present in the watermaker. Therefore, it is essential that the correct shut down and storage
procedures are followed to ensure continued purity of the fresh water. UV treatment of the fresh water may
well be beneficial

Schenker SMART 60 Specifications

General

Brand	Schenker
Model	SMART 60
Category	Water Filtration Systems
Language	English