www.scheppach.com
GB
|
23
• -
chines or loudspeakers.
9. Proper use
The machine corresponds to the valid EU Ma-
chine Directive
•
devices must be installed on the machine.
• -
son. The operator will be responsible for the pres-
ence of third persons in the work area.
•
machine.
•
machine in complete and readable form.
•
small and medium-sized tiles (glazed, ceramic or
Cutting of metal and wood is not allowed.
• The dimensions of the workpieces to be machined
-
imum and minimum dimensions.
•
consideration to the operating instructions manual!
• -
-
observed.
• The applicable accident prevention measures and
rules must be observed.
• The machine must be used, serviced or repaired
have been briefed about its risks.
there from null and void.
• -
cessories and original tools of the manufacturer.
Residual risks
Despite proper use, certain residual risk factors
occur, depending on the design and structure of the
machine:
• Intervention in the running diamond cutting disc.
• Contact with the diamond cutting disc in exposed
area.
• Ejection of work pieces and work piece compo-
nents.
• -
ting disc.
as pipes and radiators. Please be watchful. Do not
• ANSI- approved dust masks.
•
•
ADDITIONAL INSTRUCTIONS
FOR LEAKAGE CURRENT CIRCUIT-BREAKER.
Please observe the following important instructions
on start-up and handling.
-
ating Instructions manual for subsequent reference.
SAFETY INSTRUCTIONS!
• -
(CE). Never dismantle the product.
•
Children cannot assess the risks involved in han-
-
tention to the presence of children.
• The structure of the product corresponds to Pro-
-
• In industrial equipment, the Accident Prevention
-
be observed.
•
workshops, the operation of the product must be
•
drops from even low heights can damage the ma-
chine.
• Never use the product if it is brought from a cold to
a hot room. Under certain circumstances, the re-
• Let the product come to the room temperature, be-
-
der certain circumstances, this can take several
hours.
• Do not hold the product with moist or wet hands.
• Ensure that the Insulation of the entire product is
• If the product is not operated over long periods,
plug out of the socket.
• Avoid the following environmental conditions at the
installation site or during transport.
•
or combustible gases, vapours or solvents. Strong
vibrations.
To Next Page
Loading...
Need help?
General
