Scheppach HMS850 Original Instruction Manual

www.scheppach.com
36
|
GB
Technical data – Thicknessing
Max planing width 204 mm
Max planing thickness 120 mm
Max chip removal 2 mm
Thicknessing table size 350 x 204 mm
Drive
Motor 230 V~ / 50 Hz
Consumption power S1 1250 W
Subject to technical changes!
Sound
Sound values were measured in accordance with
EN 61029.
Sound pressure level L
pA
101 dB
Uncertainty K
pA
3 dB
Sound power level L
WA
114 dB
Uncertainty K
WA
3 dB
Wear ear-mu󰀨s.
Wear ear-mu󰀨s.
The impact of noise can cause damage to hearing.
Keep the noise emissions and vibrations to a min-
imum!
• Only use appliances which are in perfect working
order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever necessary.
• Switch the appliance o󰀨 when it is not in use.
7. Unpacking
• Open the packaging and carefully remove the de-
vice.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Danger from current if the electric cables have not
been connected correctly.
• harmful wood duct may be generated if operated
without an extractor or chip bag.
• by catapulted parts
• Metal parts in the workpiece can blunt or destroy
the blades.
• Lung damage if no suitable protective dust mask is
used.
m WARNING! Hearing damage!
A longer stay in the immediate vicinity of the running
unit may cause hearing damage.
Wear ear protectors!
Despite the observance of the operating instructions
there still may be some hidden residual risks.
Emergency procedure
Conduct a rst-aid procedure adequate to the injury
and summon qualied medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down.
For the sake of eventual accident, in accordance with
DIN 13164, a workplace has to be tted with a rst-aid
kit. It is essential to replace any used material in the
rst-aid kit immediately after it has been used.
If you seek help, state the following pieces of informa-
tion:
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
6. Technical data
Technical data
Number of knives 2 pieces
Cutter block rpm 8000 rpm
Dimensions 780 x 440 x 455 mm
Weight 21 kg
Technical data – Surfacing
Max planing width 204 mm
Max chip removal 2 mm
Ripping fence l x h 520 x 102 mm
Ripping fence tilting angle 90°–45°
Surfacing table size 737 x 210 mm

Scheppach HMS850 Specifications

General

Brand	Scheppach
Model	HMS850
Category	Planer
Language	English