EasyManuals Logo
Home>SCHUBERTH>Motorcycle Accessories>SC2

SCHUBERTH SC2 User Manual

SCHUBERTH SC2
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
SC2 Motorcycle Bluetooth
®
Communication System with Mesh Intercom™ | 48
12 CONFIGURATION SETTING
12.2 Software Conguration Setting
You can change the settings of the headset through the SCHUBERTH
Device Manager or the SCHUBERTH SC2 App.
12.2.1 Speed Dial
Assign phone numbers for speed dialing to make a phone call quickly.
12.2.2 Headset Language
You can select the device language. The selected language is maintained even
when the headset is rebooted.
12.2.3 Audio Equalizer (Default: O)
You can use the Audio Equalizer to increase/decrease the decibel level of
different frequency ranges of audio.
Balance will adjust all of the frequency ranges to be the same volume level
(0 dB).
Bass Boost will increase the bass range of audio (20 Hz - 250 Hz).
Mid Boost will increase the mid range of audio (250 Hz - 4 kHz).
Treble Boost will increase the high range of audio (4 kHz - 20 kHz).
12.2.4 VOX Phone (Default: Enable)
If this feature is enabled, you can answer incoming calls by voice. When you
hear a ringtone for an incoming call, you can answer the phone by saying
a word such as “Hello loudly or by blowing air into the microphone. VOX
Phone is temporarily disabled if you are connected to intercom. If this feature
is disabled, you have to tap the Center Button to answer an incoming call.
12.2.5 VOX Intercom (Default: Disable)
If VOX Intercom is enabled, you can initiate an intercom conversation with the
last connected intercom friend by voice. When you want to start intercom, say
a word such as “Hello loudly or blow air into the microphone. If you start an
intercom conversation by voice, the intercom terminates automatically when
you and your intercom friend remain silent for 20 seconds. However, if you
manually start an intercom conversation by tapping the Center Button, you
have to terminate the intercom conversation manually. However, if you start
the intercom by voice and end it manually by tapping the Center Button, you
will not be able to start intercom by voice temporarily. In this case, you have
to tap the Center Button to restart the intercom. This is to prevent repeated
unintentional intercom connections by strong wind noise. After rebooting the
headset, you can start the intercom by voice again.

Table of Contents

Other manuals for SCHUBERTH SC2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SCHUBERTH SC2 and is the answer not in the manual?

SCHUBERTH SC2 Specifications

General IconGeneral
BrandSCHUBERTH
ModelSC2
CategoryMotorcycle Accessories
LanguageEnglish

Related product manuals