SC2 Motorcycle Bluetooth
®
Communication System with Mesh Intercom™ | 50
12 CONFIGURATION SETTING
12.2.10 HD Intercom (Default: Enable)
HD Intercom enhances the two-way intercom audio from normal quality to
HD quality. HD Intercom will become temporarily disabled when you enter into
a multi-way intercom. If this feature is disabled, the two-way intercom audio
will change to normal quality.
Note:
•
The intercom distance of HD Intercom is relatively shorter than that of
normal intercom.
•
HD Intercom will become disabled temporarily when Bluetooth Intercom
Audio Multitasking is enabled.
12.2.11 HD Voice (Default: Enable)
HD Voice allows you to communicate in high-definition during phone calls.
This feature increases the quality so that the audio will be crisp and clear
during phone call conversations.
If this feature is enabled, incoming phone calls will interrupt intercom
conversations and audio from the SR10 will not be heard during intercom
conversations. Three-Way Conference Phone Call with Intercom Participant
will not be available if HD Voice is enabled.
Note:
•
Refer to the manufacturer of your Bluetooth device that will be
connected to the headset to see if it supports HD Voice.
•
HD Voice is active only when Bluetooth Intercom Audio Multitasking is
disabled.
12.2.12 Smart Volume Control (Default: Disable)
Enabling Smart Volume Control automatically changes the level of the
speaker volume based on the level of the environment noise. You can enable it
by setting the sensitivity to low, medium, or high.
12.2.13 Sidetone (Default: Disable)
Sidetone is audible feedback of your own voice. It helps you to naturally
speak at the correct level according to varying helmet noise conditions. If this
feature is enabled, you can hear what you are speaking during an intercom
conversation or a phone call.
To Next Page
Loading...
Need help?
General
