Sharp LC-60LE925X User Manual

HDMI OUT
HDMI
IN
HDMI
OUT
15
Preparation
Using Digital Audio Output
It is possible to output audio through the
DIGITAL
AUDIO OUTPUT
terminal. PCM or Dolby Digital audio
outputs from the terminal.
To optical digital input of external audio devices
Optical
fi bre cable
(commercially
available)
NOTE
• The DIGITAL AUDIO OUTPUT terminal usually outputs the
same audio from the speakers. (The audio of the content
you are viewing is output from the terminal.)
• The DIGITAL AUDIO OUTPUT terminal does not output
some signals, depending on devices and software.
• Optical digital audio will be output in 2-ch stereo when it is
from the external equipment connected to the TV using an
HDMI cable.
Connecting a Digital TV STB (Set Top Box)
You can use the INPUT4 (ARC)/INPUT5/INPUT6/INPUT7 (HDMI) or the INPUT1 (component)/INPUT2 (composite)
terminals when connecting to a Digital TV STB (Set Top Box), and other audiovisual equipment.
NOTE
• When using a DVI-HDMI adaptor or conversion cable, input the Audio Signal from the AUDIO terminal of AUDIO IN. (See page
62.)
When using HDMI cable
(commercially available)
When using component cable
(commercially available)
STB (Set Top Box)
STB
(Set Top
Box)
R – AUDIO – LYP
B
(CB)
P
R
(CR)
Connecting a PC
You can use the INPUT3 (PC) terminal when connecting to a
PC. (See page 66.)
PC
ANALOGUE
RGB
AUDIO
(L/R)
Connecting an AV amplifi er
STB (Set Top Box)
HDMI-certifi ed cable
NOTE
• If the image is not in sync with the audio, check the settings
of the connected surround system.
• Letting the TV output the audio to an AV amplifi er:
- When you connect ARC-compatible equipment, use the
INPUT4 terminal.
- If the equipment to be connected is not compatible with the
ARC, connect an optical fi bre cable.
60LE925X_en_au.indd 1560LE925X_en_au.indd 15 2010/09/01 16:27:462010/09/01 16:27:46

Sharp LC-60LE925X Specifications

General

Brand	Sharp
Model	LC-60LE925X
Category	TV
Language	English