31
Password setting for the child lock
Allows you to use a password to protect certain
settings from being accidentally changed.
Setting a password
Register a 4-digit password number to use the Child
Lock function.
Press MENU and the MENU screen displays.
1
Press
c/d
to select “Setup”.
2
Press
a
/
b
to select “Password”, and then
press ENTER.
5
If you already set the password, enter it here.
6
Watching TV
Password
Yes No
Setting Password. You can change or
clear Password
Enter your new password.
Use 4 digits
Enter the password again to confirm
NOTE
• To view a locked channel (Lock setting in Programme setup
“Manual adjust” is set to “On”), you must enter a password.
(See page 24.) When you select a locked channel, a
password prompt message pops up. Press RETURN to
display the password input window.
Enter the 4-digit number as in step 8 to
confi rm.
9
Press
c/d
to select “Yes”, and then press
ENTER.
7
Password
Yes No
Setting Password. You can change or
clear Password
Enter your new password.
Use 4 digits
Enter the password again to confirm
Enter the 4-digit number as a password using
0 - 9.
8
NOTE
• As a precautionary measure, make a note of your
password on the back of this operation manual, cut
it out and keep it in a safe place that children cannot
reach. (See page 89.)
• This function is only available for TV input mode.
• To relock a channel which has been temporarily unlocked
by inputting the correct password, turn power off and then
on again.
Deleting the password
Allows you to clear your password.
Yes No
Delete password?
Password
Repeat steps 1 to 5 in Setting a password.
1
Press
c
/
d
to select “Yes”, and then press
ENTER to delete the password.
4
Enter the password.
2
Press
b/c/d
to select “View setting”.
3
Press
a
/
b
to select “Individual setting” and
then press ENTER.
4
Press
c
/
d
to select “No”, and then press
ENTER.
3
Press ENTER to complete.
10
Password
OK
:Enter
Press to complete
60LE925X_en_au.indd 3160LE925X_en_au.indd 31 2010/09/01 16:29:032010/09/01 16:29:03