24
Watching TV
Manual setting for each channel (Analogue)
(continued)
Sound system (Broadcasting system)
Press
a
/
b
/
c
/
d
to select the channel you
want to edit, and then press ENTER.
• The selected channel information displays.
Press
a
/
b
to select “Sound sys.”, and then
press ENTER.
• Receivable sound systems (Broadcasting systems)
are listed.
1
2
Press
a
/
b
to select the optimum sound
system, and then press ENTER.
3
Labelling channels
You can change individual channel names.
Setting the child lock
You can block the viewing of any channel.
Press
a
/
b
/
c
/
d
to select the channel you
want to edit, and then press ENTER.
• The selected channel information will be displayed.
1
Press
a
/
b
to set “Lock” to “On”, and then
press ENTER.
3
Press
a
/
b
to select “Lock”, and then press
ENTER.
• Child lock menu will be displayed.
2
NOTE
• See page 31 for setting a password.
• If “Lock” is set to “On” for a channel, “Child lock has been
activated” is displayed when you select the channel, and
the image and sound of the channel is blocked.
• When pressing RETURN while “Child lock has been
activated” is displayed, password input menu will be
displayed. Inputting the correct password lifts the child lock
temporarily until the power is turned off.
Skipping channels
Channels with “Skip” set to “On” are passed over
when using CH
r
/
s
even if selected while watching
the image from the TV.
Press
a
/
b
to set “Skip” to “On”, and then
press ENTER.
3
Press
a
/
b
/
c
/
d
to select the channel you
want to edit, and then press ENTER.
• The selected channel information will be displayed.
1
Press
a
/
b
to select “Skip”, and then press
ENTER.
• Skip menu displays.
2
NOTE
• Check the sound system if the sound output were not
correct.
NOTE
• The name can be 5 characters or less. Select “Cancel” to
set the channel name.
H
Using Software keyboard
The software keyboard appears when you
need to input text.
Char.Set
Cursor Left Cursor RightCaps Char.Set
123 ./@abc
Caps a b c d e f
ghi jk l
mno pq r
stuvwx
yz: /.SP
Done Clear
DeleteCancel
R G Y B
EXIT
RETURN
1
8
76
2
3
4
9
10
11
5
1 Char. Set
Changes character set into the alphabet, numbers,
symbols, etc.
2 Caps
Changes characters to capital/lower case.
3 Done
Confi rm the entry.
4 Cancel
Abort input and close the software keyboard.
5 R/G/Y/B (Colour) buttons
Selects the coloured items on the screen.
6 Input cursor
Press
c
/
d
to move the cursor when highlighted.
7 Input fi eld
The text you enter is displayed as you type it in.
8 Character
Input characters by using these buttons.
9
?
Put a line break.
10 Clear
Erases the character string.
• When the cursor is somewhere in a line: the
character string to the right of the cursor will be
erased.
• When the cursor is at the right end of a line: the
entire line will be erased.
11 Delete
If the cursor is at the right end of a line, this erases
text one character at a time.
• You can also delete text by pressing RETURN
on the remote control unit.
Use the software keyboard to input the new
name.
• Refer to “Using Software keyboard” at the
bottom of this page.
3
Press
a
/
b
/
c
/
d
to select the channel you
want to edit, and then press ENTER.
• The selected channel information displays.
1
Press
a
/
b
to select “Label”, and then press
ENTER.
• The software keyboard will be displayed.
2
60LE925X_en_au.indd 2460LE925X_en_au.indd 24 2010/09/01 16:28:192010/09/01 16:28:19
To Next Page
Loading...
Need help?
General