ContentsPXL Conventional Fire Alarm Control Panel
iii
Illustrations
1. Basic PXL System............................................................................................. 2
2. The PSE-1 Enclosure ....................................................................................... 7
3. Removing the PMK-1 Bracket from the PSE-1 ................................................. 8
4. PPS-10M Module Board ................................................................................. 10
5. Sliding the PPS-10M into the PMK-1 Bracket ................................................. 11
6. Mounting the PPS-10M on the PMK-1 Bracket ............................................... 11
7. PRM-4 Module Board...................................................................................... 12
8. Mounting the PRM-4 on the PMK-1 Bracket ................................................... 13
9. PNC-2Z Module Board .................................................................................... 14
10. Mounting the PNC-2Z on the PMK-1 Bracket ................................................. 15
11. Mounting the PCM-1 on the PMK-1 Bracket ................................................... 18
12. Labeling the Zones and Terminal Blocks on the PCM-1 .................................18
13. PZE-4B Module Board ....................................................................................20
14. Mounting the PZE-4B ...................................................................................... 20
15. Labeling the Zones and Terminal Blocks on the PZE-4B ................................ 20
16. Installing the PMK-1 Bracket in the PSE-1...................................................... 22
17. Mounting the PTX-12 ...................................................................................... 23
18. Installing the Grounding Strap with Two Lugs ................................................. 24
19. Installing the Grounding Strap with One Lug .................................................. 25
20. PXL Power Limited Wiring .............................................................................. 28
21. The PCM-1 User Interface .............................................................................. 35
22. PXL Automatic System Configuration Mode ................................................... 40
23. PXL Normal Operating Mode ..........................................................................42
24. Line Graph of Alarm Verification ..................................................................... 49
25. PPS-10M Wiring for Canadian Automatic Battery Disconnect ........................ 68
Appendix C ...................................................................................... 67
Configuring and Programming the PXL Fire Alarm System for
Use in Canada ...................................................................................................67
Appendix D ...................................................................................... 69
Silent Knight 5128/5129 Digital Fire Communicator Connected
to the PXL Control Panel Reporting PXL Control Panel Conditions
to a Central Station or PXL as a Remote Supervising Station Fire Alarm
System ...............................................................................................................69
Appendix E ...................................................................................... 73
Wiring in an Expanded System (PSE-2 Enclosure) .......................................73
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
Need help?
General
