Service information
284/293 Revision 11 • INSTALLATION AND OPERATING INSTRUCTIONS • NXPLUS C • 802-9081.9
30 Permissible lubricants
The following lubricants can be obtained from the regional Siemens representative:
31 Extending the switchgear or replacing panels and
components
The individual components, such as measuring instruments, current transformers, etc. can be
replaced. For switchgear extension and replacement of components, please contact the
regional Siemens representative. Due to the busbar concept, switchgear extension or panel
replacement is possible without gas work.
Information required for spare part orders of single components and devices:
• Type and serial number of the switchgear and the circuit-breaker (see rating plates)
• Precise designation of the device or component, if applicable on the basis of the information
and illustrations in the associated instructions, a drawing, sketch or circuit diagram
Lubricants Manufacturer
Molykote (R) MKL-N Grease Dow Corning GmbH
Rheingaustr. 34
D-65201 Wiesbaden
Isoflex Topas L 32 Klüber - Lubrication KG
Geisenhauer Str. 7
Postfach 70 10 47
D-81310 Munich
Tellus Oil 32 Shell Direct GmbH
Suhrenkamp 71
D-22335 Hamburg
Weight Lubricants Order No.
180 g Isoflex Topas L 32 3AX1133-3H
1 kg Isoflex Topas L 32 3AX1133-3E
1 kg Tellus Oil 32 3AX1133-2D
1 kg Molykote (R) MKL-N Grease 5000000082
To Next Page
Loading...
Need help?
General
