802-9081.9 • INSTALLATION AND OPERATING INSTRUCTIONS • NXPLUS C • Revision 11 55/293
Description
• Installation and operating instructions
• One operating lever for DISCONNECTING function with black ball handles
• One operating lever for EARTHING/READY-TO-EARTH function with red ball handles
• Hand crank for charging the circuit-breaker closing spring
Fig. 31: Equipment of service flap with standard accessories
①
Torx screwdriver
②
Double-bit key (diameter 5 mm)
③
Adapter for emergency operation
④
Operating lever (DISCONNECTING function)
⑤
Installation and operating instructions
⑥
Hand crank
⑦
Operating lever (EARTHING/READY-TO-EARTH
function)
⑧
Double-bit key (diameter 3 mm)
⑨
Adhesive label
Operating levers for the three-position disconnector, only for switchgear with panel widths of 600 mm
(spring-operated mechanism, spring-operated/stored-energy mechanism)
Fig. 32: Operating lever for
DISCONNECTING function (black
ball handles)
Fig. 33: Operating lever for EARTHING/
READY-TO-EARTH function (red
ball handles)
Operating levers for the three-position disconnector, for switchgear with panel widths of 600 and
900 mm (spring-operated mechanism, spring-operated/stored-energy mechanism, slow motion
mechanism)
Fig. 34: Operating lever for DISCONNECTING
function (black ball handles)
Fig. 35: Operating lever for EARTHING/
READY-TO-EARTH function (red
ball handles)
To Next Page
Loading...
Need help?
General
