Siemens OpenStage 10 T User Manual

Basic functions
17
Step by Step
Making calls
Dial
^ Lift the handset.
j Internal calls: Enter the station number.
External calls: Enter the external code and the station
number.
The called party does not answer or is busy
\ Replace the handset.
or if available:
S Press the "Release" key.
On-hook dialing
j Internal calls: Enter the station number.
External calls: Enter the external code and the station
number.
The other party answers with speaker
^ Lift the handset.
The called party does not answer or is busy:
n Press the speaker key. The LED goes out.
or if available:
S Press the "Release" key.
Your system may also be programmed so that
you have to press the "internal" key before you
dial an internal number.
To call an external party, you have to enter an ex-
ternal code before dialing the party’s telephone
number (Prime Line is not active; contact your
service personnel).

Siemens OpenStage 10 T Specifications

General

Brand	Siemens
Model	OpenStage 10 T
Category	Telephone
Language	English