Step by Step
Basic functions
26
Call forwarding
Using variable call forwarding
You can immediately forward internal or external calls to
different internal or external telephones (destinations).
(External destinations require special configuration in
the system.)
r Press the key shown.
or
$ Open the idle menu Æ page 14.
Select and confirm the option shown.
Confirm,
or
select and confirm the option shown,
or
select and confirm the option shown.
j Enter the destination number.
Confirm.
Deactivating call forwarding
r Press the key shown.
or
Select and confirm the option shown.
When call forwarding is active, a special dial tone
sounds when you lift the handset.
If DID DTMF is active (contact your service per-
sonnel), you can also forward calls to this desti-
nation. Destinations: fax = 870, DID = 871,
fax DID = 872.
If you are a call forwarding destination, your dis-
play will show the station number or the name of
the originator on the upper line and that of the
caller on the lower line.
Special features must be taken into considerati-
on if your telephone operates with HiPath 5000
(system networking via PC network) Æ page 83!
Forwarding on?
1=all calls?
2=external calls only?
3=internal calls only?
Save?
Forwarding off
To Next Page
Loading...
Need help?
General