Siemens OpenStage 20 T Operating Instructions

Enhanced phone functions
51
Step by Step
Send trunk flash (not for HiPath 500)
To activate ISDN-type services and features through the
network carrier’s analog trunks or those of other com-
munications platforms (such as "consultation hold"), you
must send a signal to the trunks before dialing the ser-
vice code or telephone number.
Prerequisite: You have set up an external connection.
N Press the key shown.
Select and confirm the option shown.
j Enter the service code and/or telephone number.
*51=Trunk flash?

Siemens OpenStage 20 T Specifications

General

Brand	Siemens
Model	OpenStage 20 T
Category	Telephone
Language	English