Siemens PXM40 User Manual

Siemens
Desigo Touch and Web
Building Technologies
Commissioning
1
The touch panel requires only a few steps to be fully functional. You may need to
carry out the following tasks, however, depending on p
1.
If the associated
this must be carried out first. The touch panel cannot be commissioned wit
out working
These actions must be carried
the related
help either from within Xworks Plus or via file CM111006en.chm.
2.
Customization
These actions must also be carried out exclusively in Desigo Xworks Plus on
the related
1.1
Touch Panels, together with a
automation stations using web communication.
They allow for:
·
Lo
·
Displaying system texts, plant overviews, plant diagrams, simple alarm lists,
schedules, and trends.
·
Saving Favorites.
Desigo Touch and Web
Commissioning
– Topology
Commissioning
The touch panel requires only a few steps to be fully functional. You may need to
carry out the following tasks, however, depending on p
revious actions:
If the associated
web interface
has not been set up prior to commissioning,
this must be carried out first. The touch panel cannot be commissioned wit
out working
PXG3.W100
(no control over functionality)).
These actions must be carried
out
exclusively in Desigo Xworks Plus
the related
PXG3.W100
. To this end, consult the Desigo Xworks Plus online
help either from within Xworks Plus or via file CM111006en.chm.
Customization
of views and/or functions.
These actions must also be carried out exclusively in Desigo Xworks Plus on
the related
PXG3.W100.
Topology
Touch Panels, together with a
PXG3.W100
, help monitor and operate Desigo PX
automation stations using web communication.
They allow for:
Lo
cal or remote plant operation.
Displaying system texts, plant overviews, plant diagrams, simple alarm lists,
schedules, and trends.
Saving Favorites.
Context of the descriptions in this manual.
7 / 22
CM111029en_04
2014-08-15
The touch panel requires only a few steps to be fully functional. You may need to
revious actions:
has not been set up prior to commissioning,
this must be carried out first. The touch panel cannot be commissioned wit
h-
(no control over functionality)).
exclusively in Desigo Xworks Plus
on
. To this end, consult the Desigo Xworks Plus online
help either from within Xworks Plus or via file CM111006en.chm.
These actions must also be carried out exclusively in Desigo Xworks Plus on
, help monitor and operate Desigo PX
Displaying system texts, plant overviews, plant diagrams, simple alarm lists,

Siemens PXM40 Specifications

General

Brand	Siemens
Model	PXM40
Category	Touch Panel
Language	English