74
External Accessories
Pressure Wire Connectors “T” Connectors
Pressure Wire Connectors
Pressure wire connectors are used to connect power cables
to the SB breaker.
TA3K500SB Pressure Wire Connector
Pressure Wire Connectors
Frame
Size
Amp
Rating
Cables per
Connector
Connector
Wire Range
Catalog
Number
800 800 1-3 1/0-500 kcmil
Cu/Al
TA3K500S
1200 1200 1-4 250-500 kcmil
Cu/Al
TA4N8500
2000 1200 1-4 250-500 kcmil
Cu/Al
TA4P8500
2000 1600 1-5 300-600 kcmil
Cu/Al
TA5P600S
2000 2000 1-5 250-600 kcmiI
Cu
TA6R600S
To install the pressure wire connectors:
1.) Attach the power cables to the connectors and tighten
the set screws. Use the recommended torque supplied
with the terminal connector.
2.) Mount the connectors to the terminal pads with the
mounting bolts. Use torque value supplied with the
terminal connector.
“T” Connectors
“T” connectors are used to connect power buses to the SB
breakers. The connectors are rotatable to allow for vertical or
horizontal bus connections.
“T” connectors with mounting hardware (1 connector and
appropriate hardware shipped with each kit).
To install the “T” connectors:
1. Mount the “T” connectors to the terminal pads with the
mounting bolts. Use torque value supplied with the “T”
connector kit.
Courtesy of NationalSwitchgear.com