Configuring the SIMATIC Field PG
5-4
SIMATIC Field PG Manual
A5E00075760-04
The following screen form appears when you start the BIOS setup:
PhoenixBIOS Setup Utility
Item Specific Help
System Time:
ESC Exit
<Tab>, <Shift-Tab>, or
System Date:
Select Item
Select Menu
+ / -
Select
Change Values
Sub-Menu
F9
F10
Setup Defaults
Save and Exit
<Enter> selects field.
Diskette A: [Disabled]
Primary Master [10056MB]
Primary Slave [None]
Memory Cache:
Boot Options
Keyboard Features
[Write Back]
Hardware Options
System Memory:
Extended Memory:
Help Window
Secondary Master [ATAPI Removable]
Secondary Slave [CD-ROM]
[ 09/05/2000 ]
640 KB
128511 KB
Example:
Hour/Minute/Second/
Month/Day/Year
Enter
Help
F1
Advanced Security Power Boot Version ExitMain
[ 15:35:32 ]
Menu bar
Operating keys
Selectable
submenu
Header
Fig. 5-1 Main SETUP Menu (sample)
Menu Structure
The screen is divided into four sections. In the top section, you can select the
menu screens [Main], [Advanced], [Security], [Power], [Boot Sequence],
[Version], [Exit]. In the left of the center section you can select various settings or
submenus. Brief help texts appear on the right for the currently selected menu
entry. The bottom section contains information for operator inputs.
You can move between the menu screens using the cursor keys [←] and [→].
Menu Meaning
Main System functions are set here
Advanced An extended system configuration can be set here
Security Security functions are set here, for example a password
Power Power functions can be selected here
Boot The boot priorities are defined here
Version Information about the programming device’s release status
Exit Used for terminating and saving
To Next Page
Loading...
Need help?
General
