Technical Support
A.2 System events
Basic Panels 2nd Generation
120 Operating Instructions, 10/2016, A5E33293231-AB
System events on the HMI device provide information about internal states of the HMI device
and the controller.
ts are only indicated if an alarm window was configured. System events are
output in the language currently set on your HMI device.
System events may contain encrypted parameters which are relevant to troubleshooting
because they provide a reference to the source code of the runtime software. These
parameters are output after the text "Error code:".
Description of the system events
A listing of all system alarms for your HMI device is provided in the online help of your
configuration software.
To Next Page
Loading...
Need help?
General
