Safety instructions
1
Note
Before commissioning the device, read the Operating Instructions for the
SIMATIC IFP2200 Touch Extended standard device.
You will find information in the IFP1500, IFP1900, IFP2200 Operating Instructions (https://
support.industry.siemens.com/cs/#document/65288650?lc=en-WW).
WARNING
Danger when installing and operating the device
Before commissioning the device, read the Operating Instructions for the
SIMATIC IFP2200 Touch Extended standard device.
Scratches or other damage to the glass front can trigger unintentional operator actions. This
can result in malfunctions in the plant, material damage and personal injury.
Make sure that the glass front is not damaged during installation and operation.
WARNING
Dangerous currents when installing and connecting the device
Dangerous currents and overvoltage can occur if the device is connected incorrectly. The
protective conductor must be connected first, and observe the same instructions as for
connecting the SIMATIC IFP2200 Touch Extended standard device.
WARNING
Danger of malfunctions for the touch screen with multitouch function
Operating errors cannot be excluded on the touch screen. This can result personal injury or
damage to the machine or plant. Take the following precautions:
● Do not perform safety-relevant functions with the touch screen.
● Switch the device to a safe mode for cleaning and disconnect it completely from the power
supply for maintenance. You avoid unintentional malfunctions in this way.
ERGOline Stage 3
Manual, 02/2015, 6FC5397-4FP40-0BA0 5
To Next Page
Loading...
Need help?
General
