Siemens SIMATIC IOT2050 User Manual

SIMATIC IOT2050
124 Operating Instructions, 03/2024, A5E39456816-AF
Technical support
A
A.1 Service and support
You can find additional information and support for the products described on the Internet at
the following addresses:
• SIMATIC IOT2000 (www.siemens.com/iot2000)
• Technical support (https://support.industry.siemens.com)
• After Sales Information System SIMATIC IPC/PG (http://www.siemens.com/asis)
• SIMATIC Documentation Collection
(https://support.industry.siemens.com/cs/us/en/view/109744171)
• Your local representative (https://www.automation.siemens.com/aspa_app)
• Training center (https://www.sitrain-learning.siemens.com/PLG/?AppLang=en)
• Industry Mall (https://mall.industry.siemens.com/)
When contacting your local representative or Technical Support, please have the following
information at hand:
• MLFB of the device
• BIOS version for industrial PC or image version of the device
• Other installed hardware
• Other installed software
Tools & downloads
Please check regularly if updates and hotfixes are available for download to your device. The
download area is available on the Internet at the following link:
After Sales Information System SIMATIC IPC/PG (http://www.siemens.com/asis)
A.2 Troubleshooting
Error pattern
Possible cause
Possible remedy
Host monitor flashes black for a
few seconds when you insert
the DC connecting terminal to
the device.
You turned the switch on before
you connect the DC connecting
terminal.
Avoid turning on/off the device
by plugging /unplugging the DC
connecting terminal.
Use a external switch to control
the power of the device.
User button can't work when
Arduino shield reset pin is work-
ing.
User button and Arduino inter-
face reset pin can't work at same
time.
Avoid using user button and
Arduino interface reset pin at
the same time.

Siemens SIMATIC IOT2050 Specifications

General

Brand	Siemens
Model	SIMATIC IOT2050
Category	Gateway
Language	English