Device maintenance and repair
7.4 Removing and installing hardware
SIMATIC IPC547G
Operating Instructions, 04/2020, A5E49948632-AA
121
7.4.6 Removing the motherboard
Requirement
● The device is fully disconnected from the mains voltage; see section "Switching off the
device (Page 63)".
● The device is open; see section "Open the device (Page 76)".
● A motherboard
The motherboard as spare part is supplied without processor and memory modules.
● T10 screwdriver
Procedure
Removal
1. Remove the expansion cards from the slots, see chapter "Installing expansion cards
(Page 78)".
2. Push the built-in 5.25" drives or 5.25" adapter for the removable tray to the front; see
section "Drives".
3. Note the assignment of all cables to the motherboard.
To Next Page
Loading...
Need help?
General
