Siemens SIMATIC NET CP 1604 User Manual

Operating hardware
4.5 Prioritized startup
CP 1604 / CP 1616
84 Operating Instructions, 02/2017, C70000-G8976-C218-08
Configuration with STEP 7 / NCM PC
If you use the CP 1616/CP 1604 as a PROFINET IO controller or as a PROFINET IO device,
you will need to create the configuration with STEP 7/NCM PC. You will find more
information on this topic in the "Commissioning PC Stations" configuration manual.
4.5
Prioritized startup
Definition
An IO device with the "prioritized startup" property can reach the data transfer phase
extremely quickly after it is powered up.
Example
An industrial robot works with a tool whose actuators are controlled via IO devices. It has
other tools stored in its magazine.
When the industrial robot changes tools, the "prioritized startup" property of the IO device is
important. The faster the IO device is available for data transfer after turning on the power,
the faster the robot can continue working.
How do I configure prioritized startup?
The "prioritized startup" property is taken into account in the configuration of the IO
subsystem with the STEP 7/NCM PC program.
You will find more information on this topic in the "Commissioning PC Stations" configuration
manual.
4.6
Eliminating problems
Eliminating problems
A disruption during the firmware download can lead to an inconsistent status on the module.

Siemens SIMATIC NET CP 1604 Specifications

General

Brand	Siemens
Model	SIMATIC NET CP 1604
Category	Controller
Language	English