Siemens SINAMICS G120C DP Manual

6 Configuration and Settings
6.1 Creating the project configuration
SINAMICS G120 DP at S7-1200
Entry-ID: 70155469, V1.4, 07/2018
45
 Siemens AG 2018 All rights reserved
6 Configuration and Settings
6.1 Creating the project configuration
Note
 If you only wish to download and commission the example program,
please follow the instructions in chapter 3 “Setting up and commissioning
the application”
 The procedure described in the step table below represents one option
of configuring a SIMATIC S7-1200 and parameterizing a SINAMICS
G120 DP for data exchange between SIMATIC controller and SINAMICS
drive. TIA Portal offers several possible solutions that differ to a greater
or lesser degree from the procedure shown here.
The step tables below describe what to do if you do not want to use the example
code, but wish to configure the SIMATIC S7 CPU, SINAMICS G120C and the HMI
KTP600. The configuration of the SIMATIC S7-1200 and the configuration of the
HMI control panel are not subject of this chapter.
6.1.1 Configuration of the components
Table 6-1: Creating the project configuration
No.
Action
Remarks
Creating the project
1.
Open TIA Portal.
2.
If TIA Portal opens in the
Portal view, go to the bottom
left to switch to the Project
view.

Siemens SINAMICS G120C DP Specifications

General

Brand	Siemens
Model	SINAMICS G120C DP
Category	Inverter
Language	English