PLC Subroutines Manual
28 6FC5397-0FP40-0BA0, 08/2013
6. Click this button and you can view the upload results.
To upload a PLC application using a USB stick, proceed as follows:
1. Insert the USB stick into the USB interface at the front of the PPU.
+
2. Select the desired operating area on the PPU.
→
3. Access the "808D data" screen by pressing these two softkeys in succession.
4. Access the "NCK/PLC data" folder by pressing this hardkey. Then select the machine
manufacturer's PLC application file (.
pte).
5. Press this softkey to copy the selected file.
6.
Press this softkey and paste the
.
pte file into the USB stick with the softkey.
7. Unplug the USB stick and plug it into the USB interface of your PC.
To Next Page
Loading...
Need help?
General
