Siemens SINUMERIK 808D ADVANCED T User Manual

PLC Subroutines Manual
6FC5397-0FP40-0BA0, 08/2013
51
Dstill BOOL M248.5 Signal for spindle stop
Dchg BOOL M248.6 Spindle gear change delay
Dmon BOOL M248.7 Monitoring for the gear change
Req_SP_G_CH
G
BOOL M244.0 Request for spindle gear change
Req_Low_G BOOL M244.1 Request to change to the low gear stage
Req_Hign_G BOOL M244.2 Request to change to the high gear stage
D_S0 TIMER T13 Spindle stop delay
Td_GearChg TIMER T24 Gear change delay
Tm_GearChg TIMER T25 Delay for monitoring the gear change
Relevant PLC machine data
None
Example for calling subroutine 49
3.23
Subroutine 50 - GearChg2_Virtual (virtual spindle gear change)
Purpose
Using subroutine 50, you can requests the system to switch to the corresponding gear after changing the gear manually.
The corresponding gear is set when M41-M45 are executed.
This subroutine must not be used together with GearChg1_Auto (SBR 49).
Local variable definition
Inputs
None
Table 3-25 Outputs
Name
Type
Description
HL_gear BOOL Output of the high/low gear
0: gear-level low gear; 1: gear-level high gear)
Assigned global variables
None
Relevant PLC machine data
None

Siemens SINUMERIK 808D ADVANCED T Specifications

General

Brand	Siemens
Model	SINUMERIK 808D ADVANCED T
Category	Industrial Equipment
Language	English