Siemens SINUMERIK 840DE SL Installation Manual

8.3 SINUMERIK controller is ONBOARDED
In this chapter you will be shown were to see if a Machine is "ONBOARDED" in the Sinumerik
Integrate 5.
You have to make the same steps with all applications:
● Manage MyResources /Programms
● Manage MyResources /Tools
● Optimize MyProgramming /NX-Cam Editor
Procedure
1. Again open the "Plant management" window.
2. The machine is displayed with the connection status "ONBOARDED" in the overview.
Connecting applications with the SINUMERIK control system
8.3 SINUMERIK controller is ONBOARDED
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
178 Installation Manual, 12/2019, A5E44672080B AE

Siemens SINUMERIK 840DE SL Specifications

General

Brand	Siemens
Model	SINUMERIK 840DE SL
Category	Control Systems
Language	English