Siemens SIPART PS2 6DR5220 Series User Manual

Introduction
12
SIP ART PS2 Manual
A5E00074631-01
The device is designed with IP65/NEMA4x degree of protection.
The intrinsically safe version can be used in hazardous areas in zone 1
or zone 2.
The explosion proof version can be used in hazardous areas in zone 1
or zone 2.
The positioner can be expanded with various options modules (chapter
2.5, page 25). The following modules are available in all:
- J
y
-module: T wo--wire current output 4 to 20 mA for position feed-
back
- Alarm module: 3 digital outputs and 1 digital input
- SIA module: one digital output for fault messages, two digital out-
puts for limit value alarms
- Manometer block: 2 or 3 manometers for single and double
action positioners
- Add--on flange (NAMUR) for safety valve block
- Add--on sets for linear and rotary actuator
Only environmentally friendly materials have been used in the
construction of the positioner .
The technical manual is printed on chlorine--free bleached paper.
Degree of
protection
Explosion
Protection
Options
Accessories
Environmental
Protection

Siemens SIPART PS2 6DR5220 Series Specifications

General

Series	SIPART PS2
Model	6DR5220
Output Signal	Pneumatic
Communication Protocol	HART
Explosion Protection	ATEX, IECEx
Input Signal	4 - 20 mA
Supply Pressure	1.4 - 7 bar
Protection Class	IP66/NEMA 4X
Power Supply	24 V DC
Housing Material	Aluminum, Stainless Steel
Mounting	Directly on the actuator
Ambient Temperature Range	-40°C to +80°C