SIPART PS2 (6DR5...)
A5E03436620-06, 04/2015
5
1.4 Nameplates
Layout of the nameplate
Software/hardware version
Consult operating instructions
Conformity with country-specific directives
Ordering supplement (Order code)
Auxiliary power (supply air PZ)
Figure 1-1 Nameplate layout, example
Layout of Ex nameplate
FM/CSA marking for hazardous area
ATEX/IECEx marking for hazardous area
Permitted ambient temperature for the hazardous
area of the corresponding temperature class
Figure 1-2 Ex nameplate layout, example
1.5 Transportation and storage
To guarantee sufficient protection during transport and storage, observe the following:
● Keep the original packaging for subsequent transportation.
● Devices/replacement parts should be returned in their original packaging.
● If the original packaging is no longer available, ensure that all shipments are properly packaged to provide sufficient
protection during transport. Siemens cannot assume liability for any costs associated with transportation damages.
To Next Page
Loading...
Need help?
General
