41 GB/IE
T
he fan speed is automatically s
et
to LOW and indicated by the
fan speed indicator
18
. The fan
speed cannot be set manually
in this mode.
To turn off the product, press the
POWER button
28
.
Using fan mode
Note: You can remove the hot air
o
utlet hose
13
from the product w
hen
operating in fan mode.
Press the POWER button
28
to switch on the product.
Press the MODE button
24
repeatedly until the mode indica-
tor
21
shows FAN. The product
is now in fan mode. The temper-
a
ture is automatically set to 25 °C
and shown on the display
20
. T
he
temperature cannot be set manu-
ally in this mode.
Push the SPEED button
23
to adjust the fan speed. The fan
speed indicator
18
shows the
selected speed (HIGH or LOW).
Using the timer function
Automatic switch-on
Push the TIMER button
22
when the product is off. The dis-
play
20
flashes and the timer
indicator
19
lights up.
Use the TEMP– button
26
/
TEMP+ button
27
to set the
timer (1–24 hours). The set time
flashes on the display
20
.
Push the TIMER button
22
again to confirm the set time.
I
f the time is not confirmed and
no
further entry is made, the timer
will be cancelled after about
10 seconds.
If necessary, select an operating
mode using the MODE button
24
. This is indicated by the
mode indicator
21
(COOL,
DEHUM or FAN). The timer will
start counting down the remain-
ing time and the product will turn
on automatically when the time
is up.
To cancel the timer function, press
the TIMER button
22
once.
Automatic switch-off
(sleep timer)
Push the TIMER button
22
when the product is on.
Use the TEMP– button
26
/
TEMP+ button
27
to set the
timer (1–24 hours). The set time
flashes on the display
20
.
Push the TIMER button
22
again to confirm the set time. If
the time is not confirmed and no
further entry is made, the timer
To Next Page
Loading...
Need help?
General
