Simplicity 9518 Series User Manual

LUBRICATION^ SERVICE
TIME INTERVAL CHART FOR SERVICE ITEMS
10 HOURS OR DAILY
Air Cleaner Cup - Clean
Engine Cooling System - Check coolant level
EngineOil Level-Check
Front Axle and Steering Linkage - Grease
(7 fittings2 WD) (6 fittings - FWD)
3-Point Hitch -Grease2 fittings and lubricate
8 bushings
Fuel Sediment Bowl - Check and clean if needed
Transmission Oil Level - Check (includes oil for
transmission and hydraulic lift system)
FWD Axle Oil Level - Check
20 HOURS
EngineOil & Filter - first change at 20 hours
on new tractor
50 HOURS
EngineOil & Filter - change (after first change)
Transmission and HydraulicOil (NewTractor)
Change oil and filter first time at 50 hours.
Fuel Filter (NewTractor) - change fuel filterfirst
time at 50 hours
Clutch - Brake Shaft Assembly - grease 3 fittings
Battery - Check electrolyte level
FWD Axle Oil - Change oil first time at 50 hours
100 HOURS
AirCleanerElement -Clean
200 HOURS
Crankcase Breather tube - Remove and Clean
Transmission and Hydraulic Oil - Change oil and filter
(after first change)
Injection PumpOil - Change
FWD Axle Oil - Change Oil (after first change)
YEARLY
Front Wheel Bearings-Clean and repack
(2 WD or300 hours, which ever comes first)
Fuel Filter - change (after first change)
or 400 hours, whichever comes first
Air Cleaner Element - Change
2 YEARS
Engine cooling system - drain and refill
16

Simplicity 9518 Series Specifications

General

Brand	Simplicity
Model	9518 Series
Category	Tractor
Language	English