Simplicity 9518 Series User Manual

LUBRICATION & SERVICE
LUBRICATION AND SERVICE GUIDE
SUBJECT
SERVICE OR LUBRICANT
INTERVAL
CAPACITIES
Engine Oil and
Oil Filter
Air Cleaner Cup
CD (DSSeries3) ClassOil
Check oil level every 10 hrs. or daily. On a
new tractor change oil and filter after the
first 20 hrs. of operation. After this initial
change, oil and filter should be changed
every 50 hrs.
Clean every 10 hrs. or daily
2.3 qts. (2.2 litres)
w/filter
New element from your
Air Cleaner
Clean as required - replace every year or
Element
Authorized Dealer.
after six cleaning, whichever occurs first.
Engine Cooling
Permanent type anti-freeze'
Check level every 10 hrs. or daily - Maintain
Approx. 3.2 qts.
System
coolant level between “FULL” & “ADD”
marks on overflow bottle. Drain and
refill every2 years.
(3 litres)
Transmission - Allis-Chalmers Power Fluid
Check level every 10 hrs. or daily. Change
4.5 gal. (17 litres)
Hydraulic Oil &
Filter
Injection Pump
Sediment Bowl
821 orSimplicity Multi¬
purpose Hyd. Transmission 0
CD (DS Series3) ClassOil
oil and filter at first 50 hrs. of
il. operation and every 200 hrs. thereafter.
C hange oi 1 every 200 hrs.
Check and clean if needed every 10 hrs.
7 fl. oz. (200 ml)
or daily.
Fuel Filter
Filter from your authorized
Replace after first 50 hrs. of opeation and
Dealer.
yearly or every 400 hrs. thereafter.
Battery
Clean distilled water only.
Check level of electrolyte solution once a
week (50 hrs.) - add distilled water when
necessary.
Front Wheel
No. 2 wheel bearing grease
Clean and repack yearly or every 300 hrs. or
Bearings
oftener i n extremely wet or muddy conditions.
Check and adjust the wheel bearings
periodically.
Front Axle
Multi-purpose grease
Lubricate Daily (every 10 hrs.) (7 fittings)
2WD (6 fittings) FWD
3-Point Hitch
Multi-purpose grease
Lubricate Daily (every 10 hrs.) (2 fittings)
Clutch - Brake
Shaft Assembly
Multi-purpose grease
Lubricate Weekly (every 50 hrs. (3 fittings)
FWD Axle
Allis-ChalmersPowerFluid Change after first 50 hrs. of operation and
1.6 qt. (1.5 litre)
821 orSimplicity Multi-
every 200 hrs. thereafter
axle housing
purpose Hyd. Transmission C
)il.
.4 qt. (0.4 litre)
lock final drive
housing
‘Capacities listed here are approximate. Use dipsticks, sight gauges or level plugs for proper fill.
17

Simplicity 9518 Series Specifications

General

Brand	Simplicity
Model	9518 Series
Category	Tractor
Language	English