Simplicity SunRunner 1691199 User Manual

Normal Care
STORAGE (30 Days or More)
I. R u n tractor engine until it stops from lack of fuel or, use
a gasoline stabilizer. This additive, available from your
dealer, prevents formation of gum and varnish for up to
one year.
^WARNING
Never store rider where gasoline fumes may reach an
open flame or sparks.
2. Change engine oil. Record the type and weight of oil put
in crankcase. See the engine Owner’s Manual for
recommendations.
3. Remove the spark plug. Squirt approximately one
ounce (30 ml) of engine oil into engine through spark
plug hole. Crank engine a few times to distribute oil and
then reinstall the spark plug.
4. Lubricate the rider and mower.
5. Check battery fluid level. Battery life will be extended if
it is removed and stored in a cool, dry place, fully
charged.
6. Clean rider thoroughly. Touch up exposed metal parts
with a good quality paint (obtainable from your dealer)
or a light film of grease or oil.
LUBRICATION
1. With an oil can, apply a few drops of oil to points
indicated with oil can in figures 4 through 11. Oil the
drive chain (figure 8) with an approved chain lubricant.
2. With a grease gun, apply one or two shots of lithium
based automotive grease to the grease fittings shown in
figures 10 and 11.
Figure 4. Luh© Brake Pedal Pivot Points
11

Simplicity SunRunner 1691199 Specifications

General

Brand	Simplicity
Model	SunRunner 1691199
Category	Lawn Mower
Language	English