Simplicity SunRunner 1691199 User Manual

Adjustments
SEAT ADJUSTMENT
NOTE
Some models are equipped with a latch which must be
released to raise seat as shown in figure 26. Push down
on back of seat to release. Be sure the latch bar locks in
place after lowering seat.
Figure 26. Seat Adjustment
A. Screws
B. Springs
1. The seat can be moved forward or back for operator
comfort. Loosen the four screws (A, figure 26) and
move the seat to the desired position. Tighten the
screws.
2. The springs (B) can be moved to forward holes for
lighter operator. Pull up out of holes to relocate
springs.
MOWER LEVELING
^WARNING
During leveling check, remove ignition key, then
remove spark plug wire and fasten it away from the
spark plug.
NOTE
If the cut is uneven, the mower may need leveling.
Unequal or improper tire pressure may also cause an
uneven cut.
L Park the rider on a level surface. Check measurements
with mower belt engaged.
2. Make sure that the mower does not rock from side-to-
side. All four leveling bolts (A, figure 27) should bear
weight from spacers (E).
28

Simplicity SunRunner 1691199 Specifications

General

Brand	Simplicity
Model	SunRunner 1691199
Category	Lawn Mower
Language	English