Singer SRP-50 - Remove Fabric from Machine

REMOVE FABRIC FROM MACHINE
1. Cut yarn above Yarn Feeder.
Remove the yarn from Feeder and drop yarn end bet-
ween Knitter and Ribber sinker posts .
2. Remove Weights from Cast-on Comb.
3. Change Carriage settings as follows.
Cam Lever .............. .... .. .... .... ........ STOCKINET ( 1\, 0) .
Set Levers ............ ...... .................. 0
Russel Levers .................... ...... .... . 11
4. Holding Cast - on Comb, move Carriage once across nee-
dles.
The stitches are released from needles .
-22-