Singer SRP-50 User Manual

If a stitch has dropped ...
1. Remove Weights from Cast on Comb as they may cause
dropped stitches to run .
2. Depress Drop Lever and bring down Ribber to middle
position .
3.
With Hook Tool, pick up dropped stitch and place it
back on needle hook. Then reform stitches by moving
needle back and forth or by using Tappet Tool.
4. Raise Ribber to original position, hook Weights on Cast-
on Comb and align needles.
If P Carriage jams ...
..... on Knitter .....
Regardless of direction in which you are moving P Carriage,
remove it and push all the needles to D position, then move
P Carriage from the left to the right.
..... on Ribber .. ...
Remove P Carriage and push all the needles to D position
using Needle Pusher, then knit the next row.
If you have failed to align needles into C position for east-
on using P
Carriage, push all the needles to D position and
move P
Carriage twice across the needles starting from
right side.
(Needles will
align in C position.)
- 57 -

Singer SRP-50 Specifications

General

Brand	Singer
Model	SRP-50
Category	Sewing Machine
Language	English