Singer SRP-50 - Correcting Knitting Errors

\
-'-· -
- ~
3r -
::;;:;..----
r
I• sf
If you have made a mistake in knit-
ting ...
1. Unravel the row incorrectly knitted . ..
To unravel stitches, hold yarn and unhook them from
Knitter and Ribber needles by pulling yarn in the ar-
rowed directions in a zigzag manner .
2. Align needles in B position, then . ..
a. If yarn comes to the side opposite Carriage,
(1) Disconnect Ribber Carriage from Arm and move it to
yarn side while tilting Carriage .
(2) Remove Ribber Arm from Knitter Carriage.
(3) Lift up Handle of Carriage, and move Carriage to the
side of the yarn .
b. If
Row Counter and Knit Contour are in use, return the
same number of rows as unravelled .
/
c. If Punch Card is in use,
( 1) Return Punch Card by the number of rows unravel-
led .
(2) Set Stop Knob to e mark .
(3) Remove Ribber Carriage and Arm from Knitter Car-
riage. *
(4) Move Knitter Carriage to yarn si de, memorizing the
pattern of next row with Handle lifted by pushing
Release Lever .
-56 -
* In case of Carriage without Release Lever , change
Carriage settings as follows without removing Ribber
Carriage or Arm.
Cam Lever ....... .. .. . ..... . ... . .. . ... ... .. . SLIP (9, S)
Side Levers (both) ··· ·· ·· ···· · ··· · ···· ·•
Set Levers (both) .... . .... . .. ... ....... . 1!]