After your flight, you may view all photos and videos captured on your drone’s microSD card in the
Review tab of the Skydio Enterprise app.
• Tap on any photo or video to review it.
• To delete media, tap and hold on any photo or video to enter selection mode, select your desired media, then tap delete.
• When using the Interval photo mode, all photos captured will appear as a single stack of photos. Tapping on the stack will allow
you to scroll through individual photos one by one.
• When capturing photos in JPG+DNG mode, only the JPG files will be displayed in the Skydio Enterprise app. You may
download the DNG image files directly from the SD card.
• If Encryption was Enabled for your flight, your encrypted media will be hidden in the Review tab until it has been
decrypted with the security key. See Reviewing and Offloading Encrypted Media for more information.
NOTE: All photos taken by the Skydio X2 have EXIF data embedded to enable postflight image analysis.
On your computer
You may also attach Skydio X2 to a computer with the USB-C cable to view and copy your full
resolution videos and photos directly off of the microSD card.
To transfer your media to your computer:
1. Power on your Skydio X2
2. Connect X2 to your computer using the provided USB-C cable
3. Import your media
NOTE: If using a Windows computer, your Skydio X2 will mount (just like a hard drive) to your desktop. You can also look for it under
Devices. If on a Mac, you can use the Photos app or the Image Capture app to transfer your footage to your desired location (both
apps are included with any current Mac, or are available from the macOS App Store).
Connecting via USB to a computer that does not supply charging power will cause Skydio X2 to run off of battery power and may drain
the battery.
64 Skydio X2 - User guide © 2021 Skydio, Inc. All rights reserved.
POST-FLIGHT OPERATIONS
Reviewing and offloading encrypted
Media
Review tab
To Next Page
Loading...
Need help?
General
