If this is your first time enabling GPS Night Flight mode, the app will prompt you to calibrate your
X2. You must complete this calibration step before you can fly.
To calibrate your drone, follow the steps below:
a. On the Fly screen, tap Calibrate
b. You will see a screen prompting you to rotate X2 in
various orientations. Hold the drone as pictured on
the left, then complete the rotation as shown by the
corresponding animation on the right:
NOTE: You do not need to complete these steps in any
particular order.
c. Once all steps are complete, tap Done
Once calibrated, you may not need to calibrate the drone again for several weeks or even months, depending on the
environment. When another calibration is needed, you will be prompted by the app.
(continue to next page...)
72 Skydio X2 - User guide © 2021 Skydio, Inc. All rights reserved.
GPS NIGHT FLIGHT / HOW TO FLY IN GPS NIGHT FLIGHT MODE
Step 3 - Toggle lights
When flying at night or in low-light conditions, you may want to enable infrared or visible strobe
lights depending on your use case.
To Next Page
Loading...
Need help?
General
