HGM7220N/HGM7220S GENSET CONTROLLER USER MANUAL
HGM7220N/HGM7220S Genset Controller 2019-02-28 Version 1.0 Page 50 of 60
15 SMS MESSAGE ALARM AND REMOTE CONTROL
16.1 SMS MESSAGE ALARM
When controller detects alarms, it shall sends messages automatically to the set mobile number.
NOTE: All stop alarms, trip and stop alarms, trip alarms will send messages to the pre-set phone number and optional
alarms will send messages to the phone according to user settings.
16.2 SMS MESSAGE REMOTE CONTROL
Users sends messages to the wireless communication module, and controller shall act the actions
according to the message orders and return the action information. Controller only acts the orders from
phone messages that set by itself. For details please see the following table.
Table 16 - SMS Message Order List
Message Return Information
Stop alarm or trip and
stop alarm
SYSTEM IN STOP MODE
GENSET AT REST
Stop mode; standby
status
SYSTEM IN MANUAL MODE
GENSET AT REST
Manual mode;
standby status
SYSTEM IN AUTO MODE
GENSET AT REST
Auto mode; standby
status
SYSTEM IN STOP MODE
GENSET IS RUNNING
SYSTEM IN MANUAL MODE
GENSET IS RUNNING
Manual mode; start
status
SYSTEM IN AUTO MODE
GENSET IS RUNNING
Stop alarm or trip and
stop alarm
Don’t start in stop
mode.
Start the genset in
manual mode.
Don’t start in auto
mode.
Return information can be set
on PC software.
Obtaining genset details.
NOTE: Message orders shall be sent based on the contents in the table, and all letters shall be capitalized.
To Next Page
Loading...
Need help?
General
