SMC Networks Barricade SMC7008ABR User Manual

7008ABR – Manual
15
CHAPTER 6 | Navigating the Web-based Administration
The Barricade’s management interface features a Setup Wizard and an Advanced Setup section. Use
the Setup Wizard if you want to quickly setup the Barricade for use with a cable modem or DSL
modem. Advanced setup supports more advanced functions like hacker attack detection, IP and MAC
address filtering, intrusion detection, virtual server setup, virtual DMZ hosts, as well as other
advanced functions.
6.1 | Making Configuration Changes
Configurable parameters have a dialog box or a drop-down list. Once a configuration change has
been made on a page, be sure to click the “Apply” or “Next” button at the bottom of the page to
enable the new setting.
Note: To ensure proper screen refresh after a command entry, be sure that Internet Explorer 5.0 is
configured as follows: Under the menu “Tools/Internet Options/General/Temporary Internet
Files/Settings,” the setting for “Check for newer versions of stored pages” should be “Every visit to
the page.”

SMC Networks Barricade SMC7008ABR Specifications

Ports & Interfaces

Ethernet ports	8 10Base-T/100Base TX RJ-45 ports
Broadband WAN port	One 10Base-T port
PSTN/ISDN connection port	One DB-9 port
Printer port	One DB-25 port

Operating Environment

operating temperature	0 to 40°C
storage temperature	-40 to 70°C
humidity	5% to 95% (non-condensing)

Weight and Dimensions

size	24.92 x 11.63 x 3.66 cm
weight	1.766 kg