SMC Networks Barricade SMC7008ABR User Manual

7008ABR – Manual
18
6.2 | Advanced Setup
Below is an outline of the Advanced Setup section. This section is used to manually configure your
ISP connection and also define the advanced system parameters, manage and control the Barricade
and its ports, or monitor network conditions.
6.2.1 | System
This section is used to configure the local time zone, password for administrator access, and the IP
address of a PC that will be allowed to manage the Barricade remotely.
• Time Zone
Use this option to the time zone for the Barricade. This information is used for log entries
and client access control.
• Password Settings
Use this menu to restrict access based on a password. By default, there is no password. For
security you should assign one before exposing the Barricade to the Internet.
NOTE: Passwords can contain from 3–12 alphanumeric characters and are not case
sensitive.
• Remote Management
This feature allows a remote PC to configure, manage, and monitor the Barricade using a
standard web browser. Check “Enable” and enter the IP address of the remote host. Click
“Apply.”
NOTE: If you specify an IP address of 0.0.0.0, any host can manage the Barricade.

SMC Networks Barricade SMC7008ABR Specifications

Ports & Interfaces

Ethernet ports	8 10Base-T/100Base TX RJ-45 ports
Broadband WAN port	One 10Base-T port
PSTN/ISDN connection port	One DB-9 port
Printer port	One DB-25 port

Operating Environment

operating temperature	0 to 40°C
storage temperature	-40 to 70°C
humidity	5% to 95% (non-condensing)

Weight and Dimensions

size	24.92 x 11.63 x 3.66 cm
weight	1.766 kg