SMC Networks Barricade SMC7008ABR User Manual

7008ABR – Manual
19
6.2.2 | WAN
Specify the WAN connection type provided by your Internet Service Provider, then click “More
Configuration” to enter detailed configuration parameters for the selected connection type.
• Dynamic IP
The Host Name is optional, but may be required by some ISPs. The default MAC address is
set to the WAN’s physical interface on the Barricade. Use this address when registering for
Internet service, and do not change it unless required by your ISP. If your ISP used the MAC
address of an Ethernet card as an identifier when first setting up your broadband account,
connect only the PC with the registered MAC address to the Barricade and click the “Clone
MAC Address” button. This will replace the current Barricade MAC address with the already
registered Ethernet card MAC address.
If you are unsure of which PC was originally set up by the broadband technician, call your
ISP and request they register a new MAC address for your account. Register using the
default Barricade MAC address.

SMC Networks Barricade SMC7008ABR Specifications

Ports & Interfaces

Ethernet ports	8 10Base-T/100Base TX RJ-45 ports
Broadband WAN port	One 10Base-T port
PSTN/ISDN connection port	One DB-9 port
Printer port	One DB-25 port

Operating Environment

operating temperature	0 to 40°C
storage temperature	-40 to 70°C
humidity	5% to 95% (non-condensing)

Weight and Dimensions

size	24.92 x 11.63 x 3.66 cm
weight	1.766 kg