SMC Networks Barricade SMC7008ABR User Manual

7008ABR – Manual
22
6.2.3 | LAN
From this section you can configure the TCP/IP configuration for the Barricade LAN interface and
DHCP clients.
• LAN IP
Use the LAN menu to configure the LAN IP address for the Barricade and to enable the DHCP
server for dynamic client address allocation. Set a period for the lease time if required. For
home networks this may be set to “Forever”, which means there is no time limit on the IP
address lease.
• IP Address Pool
A dynamic IP start address may be specified by the user, e.g. 192.168.2.100 (default value).
Once this start IP address has been assigned, IP addresses running from 192.168.2.100 to
192.168.2.199 will be part of the dynamic IP address pool. IP addresses from 192.168.2.2 to
192.168.2.99, and 192.168.2.200 to 192.168.2.254 will be available as static IP addresses.
NOTE: Do not to include the address of the Barricade in the client address pool.

SMC Networks Barricade SMC7008ABR Specifications

Ports & Interfaces

Ethernet ports	8 10Base-T/100Base TX RJ-45 ports
Broadband WAN port	One 10Base-T port
PSTN/ISDN connection port	One DB-9 port
Printer port	One DB-25 port

Operating Environment

operating temperature	0 to 40°C
storage temperature	-40 to 70°C
humidity	5% to 95% (non-condensing)

Weight and Dimensions

size	24.92 x 11.63 x 3.66 cm
weight	1.766 kg