SMC Networks Barricade SMC7008ABR User Manual

7008ABR – Manual
42
A.4 | I have a Dynamic IP connection and I can’t get online
Most cable companies use a Dynamic IP configuration to provide internet access. If have this type of
a connection, and are unable to get connected please follow the steps outlined below:
1. Unplug the power from your Cable or DSL modem for 2 mins.
2. Confirm that your Barricade router is configured for a Dynamic IP configuration
3. Plug the power back into your Modem.
4. Wait for your Modem to sync up to the network and then click on the status page of the
router to confirm you are online.
The reason this process works is because certain broadband connections require a MAC address to
gain network access. This MAC address can be changed by following the process above to re-set the
approved MAC address to the MAC address of the Barricade router.

SMC Networks Barricade SMC7008ABR Specifications

Ports & Interfaces

Ethernet ports	8 10Base-T/100Base TX RJ-45 ports
Broadband WAN port	One 10Base-T port
PSTN/ISDN connection port	One DB-9 port
Printer port	One DB-25 port

Operating Environment

operating temperature	0 to 40°C
storage temperature	-40 to 70°C
humidity	5% to 95% (non-condensing)

Weight and Dimensions

size	24.92 x 11.63 x 3.66 cm
weight	1.766 kg