SMC-EZ1026DT V.2
7
10/100Base-TX RJ-45 ports (Auto MDI / MDIX):
24x 10/100Mbps auto-sensing port for 10Base-T or 100Base-TX
devices connection. Note: [MDI/MDIX means that you can connect
to another Switch or workstation without changing non-crossover or
crossover cable.]
Expansion Slots:
For two of the following Optional modules:
1 Port Gigabit 1000Base-T Intelligent Switch Modules,
1 Port Gigabit 1000Base-SX/LX Intelligent Fiber Modules.
1 Port 100Base-FX Intelligent Fiber Module
GBIC/Mini GBIC Module
Console Port:
Console Management can be done through the Console Port. It
requires a direct connection between the SMC-EZ1026DT V.2
Switch and an end station (PC) via a RS-232 cable.
2.2 LED Indicators
All LED indicators are located on the front panel of the
SMC-EZ1026DT V.2 Switch. They provide a real-time indication of
system and operational status. The following table
gives descriptions of the LED status and their meanings.
Figure 2-2 The LED
Indicators
To Next Page
Loading...
Need help?
General
