SMC Networks ISE40A User Manual

-39-
No.PS※※-OMM0007-H
■[F11] Display resolution
This function is used to change the pressure display resolution.
This can be used to prevent the digits from flickering on the display.
<Operation>
Press the or button in function selection mode to display [F11].
Press the button. Move on to setting of display resolution.
Press the button to set. Return to function selection mode.
Setting of [F11] Display resolution completed
: Not selectable depending on the selected display units.
The display resolution selectable unit is MPa, kPa (for ZSE only), kgf/cm
2
, bar, psi and inHg.
The display units kgf/cm
2
, bar, psi and inHg are selectable only for models with the units selection function.
[F 0] Units selection function on page 27.
Setting of display resolution
Press the
or
button to select display
resolution.

SMC Networks ISE40A Specifications

General

Brand	SMC Networks
Model	ISE40A
Category	Switch
Language	English