SMC Networks ISE40A User Manual

-53-
No.PS※※-OMM0007-H
Troubleshooting
○Troubleshooting
Applicable Pressure switch: ZSE40A(F)/ISE40A
If the cause of the failure cannot be identified and normal operation can be recovered by replacement with
a new the product, this indicates that the product itself is faulty. The product damage can be caused by the
operating environment (network construction, etc.), therefore contact SMC.
Yes
No
The pressure
switch does not
operate correctly
Refer to Fault
No.1
The switch output
is ON
The indicator LED
is ON
The indicator LED
operates incorrectly
The switch output
is OFF
The switch output
is chattering
The indicator LED
is OFF
The indicator LED
is OFF
The indicator LED
is ON
The product is
faulty
Refer to Fault
No.2
Refer to Fault
No.1
Refer to Fault
No.4
Refer to Fault
No.3
The product is
faulty
The product is
faulty
Analogue output
Is not provided
(specified accuracy
is not satisfied)
Refer to Fault
No.6
Slow switch
output response
Refer to Fault
No.5
An Error is
displayed
Refer to Fault
No.7

SMC Networks ISE40A Specifications

General

Brand	SMC Networks
Model	ISE40A
Category	Switch
Language	English