2.2. Security
Do not install the product at the following locations without a qualied technician:
• Medical equipment directly related to human life preservation;
• Equipment on elevators or rapid transit systems related to personal safety;
• Critical computing hardware for public systems;
• Other equipment similar to the ones mentioned above.
Please discuss with your distributor before installing the product at the locations mentioned above. Special
considerations and designs are required for the operation, setup, management, and maintenance of critical
equipment and emergency backup power generators related to personal safety and public facilities.
Do not place vases or other water containers on top of the main unit. Water spilled into the machine may damage
internal components and pose a shock hazard.
Using this product in locations with sparks, smoke, or natural gas may result in arcing, personal injury, and re
hazards.
The operating environment and storage method affects the product lifespan and malfunctions. Thus, please keep
the product away from the following operating environments:
• Locations specied in the operating manual as high temperature, low temperature, and high humidity
(temperatures outside -5 to 40° and relative humidity outside 5% to 90%);
• Locations with sparks;
• Locations with dust, corrosive material, salt content, or ammable gas;
• Outdoors.
Immediately stop using this product in the event of abnormal sounds or odors.
Contact your distributor for maintenance.
Improper grounding results in electrical leakage. Please make sure your AC input power is properly grounded.
Please conrm the input voltage does not exceed the rated capacity of the Statys XS.
Do not disassemble this product without a technician from the original manufacturer or authorized distributor. Doing
so voids your warranty and is also a shock hazard.
To Next Page
Loading...
Need help?
General